Kitchen Knock
Kitchen Knock Dishwasher Basket Trolley / Stand – 6 Tiers - 550mm × 500mm × 1800mm – 404092
550 × 520 × 1800mm
$329.80$388.00
In Stock
Commercial Dishwasher
Dishwasher accessories are the support items that keep a commercial wash area running: racks, chemicals, hoses, drain pumps, softeners, spray arms and replacement or installation parts.
Choose this category when the machine is already selected or in service and the problem is continuity, setup or wash quality. It is not a substitute for choosing the right dishwasher format.
Check that the rack fits both your glassware and your machine before ordering.
Record the machine model, accepted rack dimensions and usable wash height. Measure your tallest glass and its widest point, including the bowl or base. Check the loaded rack height again if you add an extender.
The Vogue CB006 dolly is listed for 500 mm square racks with a 40 kg capacity. Check your rack base, total loaded weight and the route between washing and storage before choosing it.
For powered accessories such as polishers, also check the specified electrical supply and available bench or floor space. Rack selection does not replace choosing a dishwasher suited to the workload.
Submit your kitchen requirements — our equipment specialists will send you a tailored shortlist of dishwasher accessory that fits your budget, venue type and compliance needs.
Standards & Compliance
Accessory decisions should be tied to the machine and the site:
No. Check your machine's accepted rack dimensions and usable wash height before ordering. Include the glasses and any extender when checking the loaded height.
They keep glasses in separate compartments. Choose an opening and height that suit your glassware; a higher compartment count is useful only when each glass fits.
Consider one when you regularly move loaded racks between washing and storage. Check the rack footprint and total loaded weight against the dolly specification.
They are support items such as racks, chemicals, softeners, hoses, drain pumps, spray arms and installation or maintenance parts for commercial dishwashers.
Why KW
KW treats accessories as wash-bay support. The useful questions are machine compatibility, water quality, rack handling and maintenance continuity, not whether an accessory can make the wrong dishwasher do the right job.
Deep Dive
Technical depth from KW's commercial kitchen specialists.
Use racks to organise the load, detergent and rinse aid for the wash process, softeners where water quality calls for it, hoses and drain pumps for installation constraints, and spray arms or small parts for maintenance support. Operator detail: label rack types by station so glass racks do not drift into the plate wash area during busy service.
Accessories usually sit beside a selected underbench dishwasher, passthrough dishwasher or commercial glasswasher. If you are still choosing the machine, start with the dishwasher format first.
Buy them when setting up a new wash bay, replacing worn parts, improving rack handling or solving water and drainage issues around an existing machine.
Sometimes, if the issue is water quality, chemicals, rack use or a worn component. They cannot make an undersized or wrong-format machine suit the workload.
69 results
550 × 520 × 1800mm
550 × 520 × 850mm
500 × 500 × 100mm
500 × 500 × 100mm
500 × 500 × 100mm
450 × 520 × 850mm
550 × 520 × 850mm
500 × 500 × 100mm
500 × 500 × 100mm
500 × 500 × 100mm
500 × 500 × 45mm
425 × 350 × 75mm
538 × 538 × 210mm
500 × 500 × 100mm
407 × 460 × 836mm
450 × 520 × 850mm
500 × 500 × 70mm
350 × 350 × 180mm
380 × 450 × 550mm
800 × 760 × 783mm
652 × 515 × 412mm
450 × 370 × 540mm
425 × 350 × 20mm
400 × 400 × 130mm
400 × 400 × 130mm
500 × 500 × 100mm
500 × 500 × 100mm
500 × 500 × 280mm
500 × 500 × 100mm
500 × 500 × 100mm
500 × 500 × 100mm
107 × 107 × 139mm
