MEIKO FV130.2 Commercial Pot Washer – Powerful, Hygienic & Efficient

Updated: 30 Sep 2025

Built for Australian restaurants, caterers & food processing facilities

The MEIKO FV130.2 handles the toughest wash loads with ease. It brings customisable cycles (120/240/360–480 s), AktivPlus filtration, and a self-cleaning program together with MIKE 2 electronic control to deliver spotless pots, pans, trays and utensils shift after shift.

Key features & specifications

• Rack & capacity: 850 × 700 mm; theoretical 20 / 12 / 7 racks per hour
• Programme cycles: 180 / 300 / 480 s (site-selectable variants 120 / 240 / 360 s)
• Entry height: 740 mm
• Dimensions (W×D×H): 1030 × 895 × 1785 mm
• Hydraulics: Tank fill 85 L; rinse 9 L per cycle
• Drive & heating: Total connected load 26.7 kW; tank heating 12.0 kW; pump motor 2.2 kW
• Controls & safety: MIKE 2 control with infrared interface; Aqua-Stop leakage protection; IPX5
• Hygiene design: Coved-corner tank, Class “A” air gap; oscillating wash arms + rotating rinse arm
• Utilities: 3NPE 400 V, 50 Hz; water ¾″, 1–5 bar
• Warranty: 12 Months

Compliance & safety (AU)

• Electrical: RCM compliant; install by a licensed electrician.
• Energy: Optimised rinse volume (9 L/cycle) reduces water & energy use.
• Food safety: FSANZ-aligned hygienic warewashing design.
• Gas (if applicable): Not applicable (electric unit).

Convenience & usage advice

• Faster turnaround: Select cycle length to match soil level and save time.
• Low-touch cleaning: Run the automatic self-clean program at end of day to reduce labour.

Ideal applications

• High-volume restaurants & hotels
• Catering & events kitchens
• Food processing & central production

Frequently Asked Questions

1) How do I clean it daily without harming finishes?

Run the auto self-clean program; wipe stainless panels with a pH-neutral cleaner; avoid abrasives and chlorine; leave the door ajar to dry.

2) What routine maintenance keeps performance stable?

Rinse filters daily; check wash/rinse arms weekly; descale and service quarterly; keep the infrared interface clean for reliable diagnostics.

3) What are the power and water requirements?

3-phase 400 V supply, total connected load 26.7 kW; 9 L rinse water per cycle; potable water at 1–5 bar via ¾″ connection.

4) What about installation and Australian compliance?

RCM electrical compliance; install by licensed trades; position with adequate drainage and ventilation per FSANZ hygiene guidance.

5) Are spare parts and accessories available?

Wash/rinse arms, filters, seals, and control components are available—quote model FV130.2 for exact parts.

Specs source: official literature for MEIKO FV130.2.