Commercial 900mm Gas Chargrill NG – Brenner BREG8C-900N

The Forge 800 chargrill uses 3 U-shaped gas burners beneath its cooking surface. The supplier also lists a pilot system, piezo ignition and flame-failure protection for this gas configuration.

Its 900 mm nominal frontage and 800 mm depth fit the Forge 800 modular line. Confirm gas type, actual total gas load and extraction requirements with the installer before purchase.

The Brenner Forge 800 Series gas char grill top is a commercial gas char grill for steak, chicken and vegetable work where char marks and even surface heat matter. U-shaped burners spread heat evenly across the cooking surface instead of leaving hot and cold bands.

It comes in 300, 600, 900 and 1200mm widths on the same 800mm commercial depth as the rest of the 800 Series, so a char grill, griddle and cooktop line up flush.

Key Features

• Even heat across the grill
  -U-shaped burners provide even heat distribution across the cooking surface.
  -Full 800mm commercial depth for greater cooking capacity and stability.
  
• Reliable commercial ignition and control
  -Heavy-duty pilot system for reliable commercial performance.
  -Independent pilot shut-off valve.
  -Battery-free piezo ignition.
  -Fast ignition with no prolonged knob holding.
  -Heavy-duty zinc alloy control knobs.
• Safety and build
  -Flame failure protection.
  -Heavy-duty stainless steel gas components.
• Service and maintenance
  -Service-friendly design for reduced maintenance.
• Gas type — specify at order
  Available in Natural Gas (NG) or LPG at the same output: 30 MJ/h at 300mm, 60 MJ/h at 600mm, 90 MJ/h at 900mm and 120 MJ/h at 1200mm. Gas equipment must be commissioned by an authorized technician.

2 Years Parts and Labour + 2 Years Parts Only for Products Registered within 14 Days of Invoice

FED describes the 900 mm model as 90 MJ/h total. Its Specifications table separately shows “Power MJ/h 30”. The 30 MJ/h figure appears to be per burner; this is an interpretation of the two FED fields, not an explicit supplier label. Confirm the gas load against the appliance plate before installation.