Modular Systems 1800-7-WB 304 Grade Stainless Steel Table 1800x700x900

The Modular Systems 1800-7-WB is a commercial kitchen worktable with a 1.2 mm 304 stainless steel top, galvanised legs and undershelf. It has height adjustment and a 320 kg bench load capacity, and comes flat packed.

A worktable for commercial kitchens needing a stainless steel preparation surface and open storage beneath. The 1.2 mm 304 stainless steel top sits on galvanised steel legs with a galvanised undershelf, making the material choice clear for buyers planning a kitchen work area.

• Commercial kitchens adding a preparation or equipment worktable with an undershelf.
• Fit-outs specifying a 304 stainless steel top with a galvanised steel base.
• Sites able to assemble a flat-packed table and adjust its height during installation.

• For a workbench specified with a rear splashback, compare the WBB7-1800/A.
• For stainless steel legs and undershelf as well as the top, choose a workbench with an all-stainless construction.
• For planned loads above 320 kg, choose a workbench with a higher load rating.

Choose the 1800-7-WB when you want a 304 stainless steel worktop and a galvanised steel base with an undershelf. If your specification calls for stainless steel throughout the legs and shelf, choose an all-stainless workbench instead.

Use the dimensions in Key Specifications above to compare the table with the available work area, access route and adjacent equipment. Plan space to reach the undershelf as well as to work at the top.

Check the intended load against the 320 kg bench load capacity and discuss the equipment placement before ordering. Plan assembly and height adjustment before fitting out the work area.

If a rear upstand is part of your kitchen layout, compare the WBB7-1800/A workbench with splashback. Check its dimensions and construction against your installation needs.

• 1.2 mm 304 stainless steel worktop with an easy-to-clean surface.
• Galvanised steel undershelf provides open storage below the top.
• Height adjustment and a 320 kg bench load capacity.

• Flat-pack supply requires assembly before use.
• The legs and undershelf are galvanised steel, so an all-stainless specification calls for another model.

• Modular Systems WBB7-1800/A Workbench with Splashback: The WBB7-1800/A is a workbench with a splashback for layouts requiring a rear upstand; the 1800-7-WB offers a 1.2 mm 304 stainless steel top with galvanised legs and undershelf.

• Assembly and positioning. Assemble the flat-packed table and use the height adjustment to set up the work area. Check the dimensions in Key Specifications above against the final position and access route.
• Equipment placement. Plan equipment placement around the 320 kg bench load capacity. Check the loading arrangement for your installation before putting the table into use.
• Cleaning and care. Keep the worktop and undershelf in the kitchen cleaning routine. Follow the applicable assembly and material-care instructions for the stainless steel top and galvanised base.

For body dimensions, see Key Specifications above.