Modular Systems 1500-7-DSBR Right-Hand Double Sink Bench – 1500×700mm

The Modular Systems 1500-7-DSBR is a right-hand double sink bench for commercial kitchens, with a 1.2 mm 304 stainless steel top, galvanised legs and undershelf. It is supplied flat packed for assembly.

A washing bench for commercial kitchens that group both sink bowls on the right and use the left side for landing items. The two bowls have different dimensions, with the same 250 mm depth, while the galvanised undershelf provides storage below the worktop.

• Commercial wash areas wanting two bowls on the right and landing space on the left.
• Kitchens choosing a 304 stainless steel top with galvanised legs and undershelf.
• Fit-outs that can assemble and plumb a flat-packed sink bench on site.

• For two bowls in the centre of the bench, consider the DSB7-1500C/A.
• For a left-hand sink layout with a pot undershelf, compare the DSB6-1500L/A.
• For a bench supplied assembled, choose a pre-assembled sink-bench model.

Choose the 1500-7-DSBR when two right-hand bowls and a left-side landing area suit the flow of dirty and clean items. Choose the DSB7-1500C/A if the bowls need to sit in the centre, or compare the DSB6-1500L/A for a left-hand layout.

Check your largest washing items against the two bowl sizes: 400 × 400 × 250 mm and 400 × 500 × 250 mm. Both bowls are 250 mm deep, so choose around their different plan dimensions as well as depth.

Use the dimensions in Key Specifications above to check the access route and final bench position. Allow space above the worktop for the rear splashback, and confirm tap positions and waste connections before ordering.

Plan assembly as part of the fit-out. If the installation calls for bolt-down feet, specify the optional DM-FEET with the order and confirm the fixing arrangement for your site.

• Two right-hand bowls leave a landing area on the left.
• Raised perimeter lip and angled draining rack help return water to the sink area.
• 1.2 mm 304 stainless steel top with a galvanised undershelf for storage.

• The bench arrives flat packed and needs assembly before use.
• The fixed right-hand bowl layout needs to match the kitchen workflow; a centre or left-hand model suits a different arrangement.

• Modular Systems FED DSB7-1500C/A Double-Bowl Sink Bench – 1500×700mm, Centre Bowls: The DSB7-1500C/A has two centre bowls, while the 1500-7-DSBR groups its two bowls on the right.
• Modular Systems DSB6-1500L/A Left Sink Bench with Pot Undershelf: The DSB6-1500L/A has a left-hand sink layout and a pot undershelf, compared with this bench's right-hand bowls and galvanised steel undershelf.

• Assemble and level. Assemble the flat-packed bench and level it using the leg and foot adjustment. Check the dimensions in Key Specifications above against the planned work area and access route.
• Plumbing and optional feet. Confirm tap positions, waste connections and the installation requirements with your installer. DM-FEET stainless steel bolt-down feet are an optional accessory; plan any fixing to suit the site.
• Cleaning. Use cleaning products suitable for stainless steel on the top and dry the work surface after use. Include the bowls, raised lip, draining rack and undershelf in the cleaning routine.

For body dimensions, see Key Specifications above.