Modular Systems FED 1800-6-SSBC Single-Bowl Sink Bench – 1800×600mm, Centre Bowl

The Modular Systems 1800-6-SSBC is an 1800 mm-wide single-bowl sink bench for commercial kitchen wash areas. It combines a 304 stainless steel top, central bowl, draining surfaces and a galvanised undershelf.

Consider this bench for restaurant and café kitchens, catering prep areas and food-processing wash areas where one central bowl suits the workflow. The 610 × 400 × 250 mm bowl provides the washing space, while the surrounding draining surfaces and undershelf help organise the station.

• Restaurant and café wash areas with room for an 1800 × 600 mm bench.
• Catering prep areas that need one central washing bowl and adjacent draining space.
• Food-processing areas arranging a single-bowl wash station with storage underneath.

• Kitchens with a shorter available run should compare the 1200-6-SSBC centre sink bench.
• Layouts that need the bowl at the left end should compare the 1200-6-SSBL.
• Jobs requiring separate washing bowls should look at double-bowl sink benches.

Start with the items you wash: compare their dimensions with the 610 × 400 × 250 mm bowl, then decide whether a single bowl covers the job or separate bowls would better suit the process.

Measure the available run against the 1800 mm width and 600 mm depth. Choose the central bowl when access to draining space on both sides works for your kitchen; compare a left-bowl model when the washing point needs to sit at one end.

Match the construction to your requirements: the top is 304 stainless steel, while the legs and undershelf are galvanised steel. Include the optional DM-FEET in your planning if bolt-down fixing is required.

• Central bowl with draining space on both sides.
• Raised perimeter lip and angled draining rack help manage wash water.
• 1.2 mm 304-grade stainless steel top with a 100 mm splashback.
• Undershelf storage and adjustable legs.

• The 1800 × 600 mm footprint needs a substantial section of the kitchen run.
• One bowl limits the station to a single washing compartment.
• The legs and undershelf are galvanised steel rather than stainless steel.
• Assembly and plumbing are required; DM-FEET bolt-down feet are optional extras.

• Modular Systems FED 1200-6-SSBC Single Sink Bench Centre – 1200×600×900 mm Stainless Steel: The 1200-6-SSBC keeps a centre sink layout in a 1200 × 600 × 900 mm bench, reducing width by 600 mm compared with the 1800-6-SSBC.
• Modular Systems FED 1200-6-SSBL Single-Bowl Sink Bench – 1200×600mm, Left Bowl: The 1200-6-SSBL has a left-positioned bowl in a 1200 × 600 mm bench, offering a shorter footprint and a different bowl position from this 1800 mm centre-bowl model.

• Measure the installation space. Allow for the 1800 × 600 × 900 mm bench and its 100 mm splashback. Check the wall position, surrounding access and plumbing route before assembly.
• Assemble and level. Assemble the flat-packed bench following its instructions, secure the legs and level the worktop. Select optional DM-FEET stainless steel bolt-down feet if the installation calls for fixed feet.
• Arrange plumbing. Have a professional installer check the water and waste connections against the site and local requirements. Position the central bowl to suit the planned plumbing route.
• Check the packed dimensions. Packing dimensions are 680 mm wide × 1870 mm deep × 480 mm high. Use these measurements when checking access for the flat-packed bench.
• Maintain the finish. Wipe daily with warm water and mild soap. Avoid abrasive pads and harsh chemicals to help protect the stainless steel finish from damage and corrosion.

For body dimensions, see Key Specifications above.