Kitchen Knock 622361 Single-Sink Dishwasher Inlet Bench – Right, 750mm, ASSD-1575R

• Exact Kitchen Knock SKU: 622361.
• Supplier model: ASSD-1575R.
• Layout: Inlet and single sink on the right.
• Supplier-listed depth: 750mm.
• 150mm splashback stated by supplier.
• 1.2mm SUS304 stainless steel top.
• 28mm diameter support tubing.
• Supplier-stated capacity: 50kg.

The supplier lists a 1.2mm SUS304 stainless steel top and a 150mm welded splashback. The supplier describes 1.0mm SUS201 stainless steel components, 28mm diameter support tubing and a 0.8mm SUS201 leg brace. It also states a 50kg capacity, which depends on correct assembly, support and load distribution.

The supplier lists a sink size of 450 × 450 × 300mm. For this single-sink family, use the published size as the supplier’s sink-bowl specification. Confirm waste positions, tap arrangement and usable spacing where those details affect dishwasher integration.

Confirm SKU 622361, model ASSD-1575R, inlet and single sink on the right and 750mm depth. Check the exact dishwasher interface, overall width and height, rack travel, drainage, plumbing, wall clearance and delivery route. Do not infer fit from a shared family image or an opposite-hand SKU.

On delivery, verify the model label, orientation and supplied components before assembly. Inspect the top, splashback, supports, sink and wastes for transit damage. Installation and service connections should follow the supplier’s instructions and applicable site requirements.