Modular Systems FED SSB7-1800C/A Single-Bowl Sink Bench – 1800×700mm, Centre Bowl

All Stainless Steel Single Centre Sink Bench & Pot Undershelf - SSB7-1800C/A
1800 mm wide

Free optional leg brace instead of pot shelf, please specify leg brace on order if required
• Bowl size 450mmW×450D×300H; 90 mm Ø drain hole
• 700 mm deep × 900 mm high
• Specially designed for quick & simple assembly
• Comes with instruction manual & tools
• Supplied flat-packed for ease of transport
• 4 legs per bench - 2100 & 2400 mm wide benches have 6 legs
• 1.2 mm S/S
• 15 mm wet edge
• Centre bowl positioning
• Bowls are fully welded, polished inside & out
• 90 mm Ø drain hole
Splashbacks
• Stainless Steel backed • 150 mm high; 30 mm thick
• Bevelled • fully enclosed 
Legs 
• 1.2 mm S/S; 42 mm Ø
• Fully adjustable S/S polished disc feet that match the legs perfectly
• Castor kits available (lockable)
Benchtops
• 1.2 mm material; SUS304 (18/8)
• Lined with XPS board, 15 mm thick & S/S panel
• Special S/S ‘U’ channel reinforcements under

• Ripple Surface
- As the bench size increases so does the number of channels
Pot Undershelves
• 1.2mm S/S (18/8)
• Outer frame tubes: 38 Ø 1.2 mm tube
• Inner tubes: 25 Ø 1 mm tube with 40 mm spacing

2 Years Parts only Warranty

To install the Single Sink Bench, you typically need a wrench, a screwdriver, sealant, and potentially plumber's tape and a level to ensure accurate alignment and connection to your plumbing system.

This sink is designed to be versatile, but compatibility with specific plumbing systems can vary. It's ideal for standard kitchen plumbing systems, though it's advisable to verify connections and pipe sizes before installation.

Regular cleaning with mild detergent and water is recommended. Avoid using abrasive cleaners or sponges, and consider using a stainless steel polish bi-annually to maintain its shine and corrosion resistance.