Modular Systems WB6-2400/A Stainless Workbench – 2400×600mm

• Wall-side preparation needing a rear splashback: compare the WBB6-2400/A workbench with splashback.
• Layouts that cannot accommodate the 2400 mm width: choose a shorter workbench.

Measure the full 2400 × 600 mm footprint and the working aisle before choosing this bench. The assembled work height is 900 mm; check that against the surrounding benches and the tasks carried out at this station.

Choose the standard solid undershelf when storage below the worktop is useful, or specify the optional leg brace instead. For preparation against a wall where a rear splashback is needed, compare a workbench with splashback before settling on this flat-top model.

• A 2400 mm-wide flat worktop provides a long preparation surface.
• The solid undershelf adjusts in height, with an extra shelf available separately.
• Six adjustable feet allow the bench to be levelled after positioning.
• Assembly tools and instructions are included.

• The 2400 mm width needs a long installation space and suitable access.
• The flat top has no rear splashback.
• Assembly is required before use.
• Choosing the leg brace replaces the solid storage shelf.

• Modular Systems WBB6-2400/A Workbench with Splashback: The WBB6-2400/A has a splashback, making it an alternative when a rear upstand is preferable to this bench's flat-top configuration.
• Modular Systems FED WBB6-2100/A Premium Workbench – 2100×600mm, Splashback, Undershelf: The WBB6-2100/A has a 2100 × 600 mm footprint, splashback and undershelf, reducing the width by 300 mm compared with this 2400 × 600 mm flat-top bench.

• Position and clearance. Allow for the 2400 × 600 × 900 mm assembled bench and enough aisle space for the work carried out alongside it. Check the intended position before assembly.
• Packed size and handling. The packed dimensions are 670 × 2470 × 185 mm, and the bench has a net weight of 63.8 kg. Plan access and handling around the long package.
• Assembly and levelling. Assemble on a level surface using the supplied tools and instructions. Adjust the feet after positioning and distribute loads across the worktop and undershelf.
• Select the configuration. Specify the optional leg brace on the purchase order if it is required instead of the solid shelf. Extra shelving, locking drawers and lockable castor kits are optional additions.
• Routine care. Use cleaners suitable for stainless steel. Wipe the surfaces clean and dry them afterwards.

For body dimensions, see Key Specifications above.