Blizzard SN-80C Professional Ice Maker – 95kg/24h, Crescent Ice

The Blizzard SN-80C is a compact, professional crescent ice maker producing up to 95kg of crescent-shaped cubes per day with 40kg built-in storage. Designed with an air/water condenser and robust stainless construction, this unit ensures reliable daily service for cafés, restaurants, convenience stores, and bars. Its compact 650mm width makes it ideal for tight back-of-house spaces needing consistent ice output.

• Electrical: RCM compliant; 240V/10A plug-in operation.
• Energy: GEMS/MEPS compliant.
• Food safety: FSANZ-aligned; hygienic stainless & LDPE storage bin design.

• Simple upkeep: Regularly clean bin with warm soapy water; descale condenser every 6–12 months.
• Compact design: Space-saving footprint suits bars and cafés with limited room.

• Restaurants & cafés
• Bars & nightclubs
• Convenience stores

Wipe stainless surfaces with a pH-neutral cleaner and microfibre cloth; clean bin interior weekly with warm soapy water. Avoid abrasives or chlorine.

Inspect vents monthly, descale condenser every 6–12 months, and schedule annual professional service for reliable operation.

Plug-in ready 10A outlet. Meets RCM standards, GEMS energy compliance, and FSANZ hygiene guidelines. Allow airflow clearance.

Yes – pumps, filters, bin lids and gaskets are available. Quote model SN-80C when ordering.

Specs source: official Blizzard SN-80C datasheet and distributor documentation.

Call 1300 001 366 or Contact our team.
Browse Ice Makers. Fast AU shipping.

• Remove scale and mineral deposits from evaporator plate and water distribution system using a manufacturer-approved, nickel-safe ice machine descaler.
• Sanitise water reservoir, distribution tubes, and bin interior.
• Clean and flush condenser coils (air-cooled units).
• Inspect condenser fan motor and blades.
• Check inlet water valve, float, and filters for correct operation.
• Verify ice thickness probe or sensor calibration.
• Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
• Test compressor amperage and general performance.
• Inspect water pump operation and clean pump housing.
• Check harvest cycle operation (heater or hot gas valve).
• Inspect electrical connections, relays, and contactors.
• Replace inline water filter cartridge - cartridges and filtration kits are in our Ice Machine Accessories range.

This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.

If your ice machine is not maintained, your warranty may be void.

To book a service, call KW Commercial Kitchen on 1300 001 366, or contact the authorised F.E.D. service team on 1300 887 055 or service@fedservices.com.au.