Commercial Kitchen · Batch Cooking · Australia 2025
Bratt Pans & Tilting Boiling Pans (With or Without Mixer) in Australia: 40–300 L Sizing, Installation, How to Use & How to Clean (2025 Guide)
Not every Professional Kitchen needs the same pan. Some menus demand a Bratt Pan’s huge searing surface; others need a Tilting Boiling Pan’s steady simmer—sometimes with an integrated mixer. This deep guide shows how to choose between Commercial Grade models (mixer vs non‑mixer), size from 40–300 L, install correctly, operate step‑by‑step, and clean to audit‑ready standards.
Audience: cafés, takeaways, pubs, clubs, hotels, caterers, central/institutional kitchens across NSW, VIC, QLD, WA, SA, TAS & ACT.
Contents
- Who this helps & search intent
- A. Model families (mixer vs non‑mixer) — what each does best
- B. Capacity planning (40–300 L): portions, pans & peak window maths
- C. Installation method (step‑by‑step checklist for AU sites)
- D. How to use — bratt pan, tilting pan, and mixer workflows
- E. How to clean — daily/weekly/monthly + mixer notes
- F. ROI snapshots — labour, injuries avoided, and payback examples
- Field notes: WA · Gold Coast QLD · Central Coast NSW
- FAQ
- Shop & talk to us
Who this helps & search intent
Primary intent: informational — “Which pan suits my menu: Bratt Pan or Tilting Boiling Pan? Do I need a mixer? What size (40–300 L)?”
Secondary intent: commercial investigation — “How to install, operate and clean for Australian conditions; what ROI to expect?”
A. Model families (mixer vs non‑mixer) — what each does best
| Family | Best for | Why it excels | When not ideal | Mixer option |
|---|---|---|---|---|
| Bratt Pan (Multi Pan) | Sear, shallow‑fry, braise, reduce; big surface area tasks | Even heat over a wide base; motorised/manual tilt to decant safely | Long, stir‑critical liquids (risotto, béchamel) without continuous agitation | Usually no integrated mixer; pair with tilting pan if stirring is vital |
| Tilting Boiling Pan — Non‑Mixer | Soups, stocks, curries, sauces; boil/simmer/poach | Stable simmer; easy tilt‑pour to GN pans; safer than lifting stockpots | Shear‑sensitive or scorch‑prone sauces that need constant agitation | Not built‑in; manual stirring required |
| Tilting Boiling Pan — With Mixer | Stir‑critical liquids (béchamel, custards), porridge/congee, polenta, chutney/jam | Integrated scraper/mixer maintains movement, reduces scorching and labour | Searing or shallow‑frying (surface area is smaller than a bratt pan) | Yes — integrated agitator/scrapers on select models/lines |
If you want both high‑temperature searing and long stirred sauces on one line, many Professional Kitchens pair a Bratt Pan with a Tilting Boiling Pan. Ask us about models that offer integrated mixer options (availability varies by brand/series).
B. Capacity planning (40–300 L): portions, pans & peak window maths
Size by peak window (often 2–4 hours) and by portion yield. Use the simple maths below to stress‑test your choice.
Quick maths
- Portions (soups/sauces):
Portions ≈ Pan litres ÷ Portion litres(e.g., 80 L ÷ 0.30 L ≈ ~265 bowls). - GN pans to fill: match batch to your GN depth; keep layers shallow for rapid cooling after cook.
| Nominal capacity | Best fit venues | Typical use | Approx. 300 mL serves | Notes |
|---|---|---|---|---|
| 40–60 L | Busy cafés, small caterers | Soups, small braises, porridge | 130–200 | Compact footprint; great training size |
| 80–120 L | Pubs, hotels, schools | Braises, curry, bulk sauces | 265–400 | Sweet spot for most lines |
| 160–200 L | Central kitchens | Stocks, stews, long simmers | 530–670 | Plan trolley paths for tilt‑pour |
| 240–300 L | Large institutions | High‑volume soups/sauces | 800–1,000 | Check floor load & utilities early |
Tip: For searing, the limiting factor is base area, not litres. If you constantly crowd proteins, a Bratt Pan with a larger footprint will deliver better colour and shorter cycles than a deep, narrow kettle.
C. Installation method (step‑by‑step checklist for AU sites)
1) Pre‑site
- Confirm access (door widths, turns, lift limits) and floor load for 40–300 L classes.
- Choose location: leave a clear tilt arc and trolley space to decant into GN pans safely.
- Check utilities:
- Electric: supply (often three‑phase for higher capacities), breaker, isolator within reach.
- Gas: licensed gasfitter, isolation valve, compliant extraction in the hood zone.
- Water: potable feed for cooking/cleaning; hose tap for wash‑down.
- Drainage: nearby floor drain or method for safe grey‑water disposal.
2) Landing & positioning
- Set the unit on feet/casters or a plinth to align with bench height; ensure level for even heat and drain‑down.
- Keep service panels and vent paths unobstructed.
3) Commissioning
- Qualified technician checks electrical connections or gas joints, leak tests, and function tests.
- Run heat‑up and tilt test; verify lid, drain and safety interlocks.
- Train staff on hot‑handling, tilt‑pour technique and cleaning chemicals/contact times.
D. How to use — bratt pan, tilting pan, and mixer workflows
Bratt Pan (sear → simmer → reduce)
- Preheat the base to searing temp; light oil film.
- Load in a single layer; sear to colour; avoid crowding.
- Deglaze; add liquids/aromatics; lid on to reach simmer, then lid ajar to reduce.
- Probe to confirm safe hot‑holding (≥ 60 °C) if holding before service.
- Tilt‑pour into GN pans on a trolley; move to blast chill or pass.
Tilting Boiling Pan — Non‑Mixer (soups/stocks/sauces)
- Charge water/stock; bring to boil; reduce to steady simmer.
- Add ingredients in stages; stir manually to prevent settling.
- Taste/adjust; skim as needed; lid for faster heat‑up.
- Tilt‑pour to GN pans; shallow‑pan for rapid cooling if storing.
Tilting Boiling Pan — With Mixer (stir‑critical)
- Fit scraper/mixer per manual; run a short sanitise cycle if specified.
- Load liquids; set target temp; start low‑speed agitation.
- Introduce starch/dairy gradually (béchamel/custards) to avoid clumps.
- Switch speeds per recipe; keep scraper contact to prevent scorch.
- Stop mixer before tilt; decant at low speed or stationary as instructed.
Food‑safety anchors (AU): keep hot‑held foods at ≥ 60 °C. If cooling: 60→21 °C within 2 hours, then 21→5 °C within 4 hours. Label batches and log times/temps.
E. How to clean — daily/weekly/monthly + mixer notes
Daily close‑down (all models)
- Allow safe cool‑down; tilt and drain liquids into heat‑safe containers at trolley height.
- Rinse warm; wash with food‑safe detergent and a non‑abrasive pad; no steel wool.
- Rinse clear; sanitise as per label; respect contact time; allow to air‑dry.
- Wipe exterior, handles, lid, controls; brush vents and kick grilles free of lint/grease.
Extra steps — Mixer models
- Disassemble scraper blades/agitator per manual; wash‑rinse‑sanitise‑air‑dry; check for wear and cracks.
- If the line supports in‑place rinsing/sanitising, follow the OEM’s CIP procedure and always finish with an air‑dry period.
Weekly
- Inspect gaskets, lip and drain seals; lubricate food‑grade O‑rings if specified.
- Check tilt bearings/drive; verify temperature accuracy with a calibrated probe.
Monthly
- Tighten fasteners; inspect cables/hoses; verify earth bonding (electric) or flame stability (gas).
- Review cleaning/temperature logs for completeness and corrective actions.
Keep simple opening/closing records (who/when/what) so supervisors and auditors can see control without slowing service.
F. ROI snapshots — labour, injuries avoided, and payback examples
High‑capacity pans pay back through labour saved, injury risk avoided (no more lifting 20–40 kg stockpots), and cleaner change‑overs. Replace the placeholders with your numbers.
| Scenario | Model | Daily batches | Minutes saved/batch | Labour rate ($/h) | Daily labour saved | Indicative CAPEX (ex‑GST) | Payback (days) |
|---|---|---|---|---|---|---|---|
| Café prep (soups/sauces) | Tilting pan 60–80 L (non‑mixer) | 6 | 6–8 | $30 | $18–$24 | $7k–$12k | ≈ 290–500 |
| Pub/venue (sear → braise → reduce) | Bratt pan 80–120 L | 8–10 | 8–10 | $32 | $34–$53 | $12k–$20k | ≈ 225–365 |
| Central kitchen (stir‑critical) | Tilting pan 120–200 L (with mixer) | 10–12 | 10–12 | $35 | $58–$84 | $20k–$40k | ≈ 240–480 |
Reality check: These snapshots exclude overheads, energy and consumables. Add a small daily allowance for detergent/sanitiser and kWh or gas to convert to net. The injury‑cost avoidance (no lifting boiling liquids) is a real but often uncounted benefit.
Field notes (anonymised): WA · Gold Coast QLD · Central Coast NSW
WA shopping‑centre canteen — Soups & porridge at breakfast
Need: repeatable simmer and low operator strain at open.
Approach: 80 L Tilting Boiling Pan (non‑mixer); trolley‑height tilt‑pour; probe checks logged.
Result: steadier morning cycles; safer decanting into shallow GN pans for rapid cooling.
Gold Coast hotel — Sear, deglaze and braise on one line
Need: big searing surface before long reduction.
Approach: Bratt Pan 100 L with splash guard; drawer fridge adjacent for proteins.
Result: faster colour and consistent texture; fewer pan swaps.
Central Coast aged care — Stir‑critical sauces
Need: béchamel and fortified sauces without scorch.
Approach: Tilting Boiling Pan 120 L with mixer option; scraper contact set to light pressure.
Result: smoother sauces, lower labour at peak, cleaner audits.
FAQ
Do I need a mixer?
If your recipes can scorch or split without constant movement (béchamel, custards, chutney, polenta), choose a Tilting Boiling Pan with mixer. For searing and shallow‑fry, choose a Bratt Pan.
Which size is right?
Start with your peak window and portion size. For 300 mL serves, 80 L yields ~265 bowls; 120 L ~400; 200 L ~670. If you crowd proteins, base area (Bratt Pan) matters more than litres.
What about installation rules?
Use licensed trades. Electric models: confirm supply and isolator; gas models: isolation valve and compliant extraction. Keep service panels and vent paths clear.
How should we cool safely?
Follow the two‑stage cool‑down: 60→21 °C within 2 h, then 21→5 °C within 4 h. Shallow‑pan the product and label containers with times/temps.
Shop & talk to us
- Commercial Multi Pans (Bratt Pans) — gas/electric, manual or motorised tilt, multiple capacities.
- Ecoinduct SGT‑E40BUM Electric Tilting Boiling Pan — a compact tilting pan for soups/sauces; ask our team about mixer‑equipped options in the range.
Book a 15‑minute spec, installation & cleaning consult (free)
Send your menu, expected portions and a quick room sketch. We’ll return a right‑sized shortlist (mixer vs non‑mixer), a commissioning checklist and a cleaning schedule tailored to your Commercial Kitchen.
- Phone: 1300 001 366
- Contact form: Request a callback (responses within a few hours)
- WhatsApp: message us via the site chat
- Service areas: on‑site install in major cities; warehouse pickup and Australia‑wide delivery
