Adande Modular Refrigeration Drawers | Single, Double & Accessories

Adande brand logo – modular refrigeration drawers

Adande Refrigeration (UK‑engineered; distributed in Australia by Stoddart) pioneered the patented refrigerated drawer. Each module delivers precise dual‑temperature control from +15°C to −22°C with exceptional humidity stability and frost‑free performance.

Ideal for QSR makelines, premium restaurants and compact cafés. Options include slimline chassis, rear/side engine and cookline heat‑shield tops. Prices from $700+GST. Call 1300 001 336 for configuration advice.

Strengths

  • True dual temperature per drawer (+15°C to −22°C, 1°C steps).
  • “Hold‑the‑Cold” design: stable temps, food doesn’t dehydrate.
  • Proven energy savings vs typical undercounter units.
  • Modular formats: compact, slimline, worktop or underbench.

Considerations

  • Premium upfront; ROI via lower energy use & reduced waste.
  • Confirm engine side (rear/side) for your bench run.
  • Check electrical (often 10A plug) & ventilation clearances.
  • Slimline reduces width but also drawer volume—match to load.

Pro Advice

  • Makeline stations: single drawer under prep for rapid access.
  • High‑turn kitchens: double drawer to split chiller/freezer.
  • Cookline: choose heat‑shield tops for 200°C proximity.
  • Add GN dividers & fry‑station kits to speed service and reduce mess.
New
Original price was: $750.00.Current price is: $700.00. Excl. GST
New

Commercial Fridges and Commercial Freezers

Adande VCM2.CT Double Drawer Matchbox Fridge-Freezer | Dual Temp

Original price was: $13,900.00.Current price is: $11,190.00. Excl. GST
New
Original price was: $12,600.00.Current price is: $10,143.00. Excl. GST
New
Original price was: $6,650.00.Current price is: $5,353.00. Excl. GST
New
Original price was: $11,950.00.Current price is: $9,620.00. Excl. GST
New

Commercial Fridges and Commercial Freezers

Adande VCS1 Single Drawer Fridge-Freezer | +15°C to -22°C, 86L

Original price was: $6,850.00.Current price is: $5,514.00. Excl. GST
New
Original price was: $12,300.00.Current price is: $9,840.00. Excl. GST
New
Original price was: $7,650.00.Current price is: $6,150.00. Excl. GST

Editor’s Top Picks for Adande

Best All‑Round (Single)

Adande VCS1 Single Drawer

  • +15°C to −22°C in 1°C steps; GN‑ready 86L.
  • Frost‑free humidity control; reduces food waste.
  • 10A plug in many configs; easy retrofit.

Most Versatile (Double)

Adande VCM2.CT Double Drawer

  • Independent drawers—chiller & freezer in one stack.
  • “Matchbox” side‑access improves bench workflow.
  • Stable temps under rush; energy‑efficient design.

Smart Accessory (Fry Station)

Adande VCC.FS Fry Station Kit

  • Transforms compact drawer into a 4‑basket fry station.
  • Stages, seasons & holds—keeps the cookline tidy.
  • Fast install; ideal for high‑turn QSR lines.

Related Reading on Refrigeration Drawers

Buying Guide: Adande Refrigeration Drawers

Selection CriteriaSingle DrawerDouble DrawerAccessories
Best for Makelines & compact stations needing fast access High‑turn kitchens splitting chiller/freezer per drawer GN dividers, fry‑station kits, bins for stock rotation
Temperature range +15°C to −22°C in 1°C steps (per drawer)
Capacity Up to ~86L per drawer (model‑dependent) ~2 × 69–86L; peak‑service resilience Organise, stage & finish the bench run
Formats Standard / compact / slimline; rear/side engine Matchbox/standard; rear/side engine options GN dividers, racks, fry‑station, worktop kits
Cookline fit Worktop or underbench; some 10A plug models Underbench stacks—one footprint, two zones Heat‑shield tops, spill control, hygiene add‑ons
OpEx & food quality Stable humidity, frost‑free; proven energy savings vs typical undercounter units Speed setup; reduce mess & handling time

Tip: slimline reduces width for tight lines; choose heat‑shield tops near grills/fryers. Plan ventilation and electrical (often 10A) to suit your bench run.

How to specify Adande

  1. Choose format: single for compact access; double for split chiller/freezer.
  2. Pick chassis: compact/slimline vs standard; rear vs side engine for airflow.
  3. Set temperatures: allocate drawers by menu (+3°C proteins / −18°C frozen, etc.).
  4. Finish workflow: GN dividers, fry‑station kits, worktop or underbench layouts.
  5. Check services: power, clearances, castors/levelling, condensate handling.

FAQ

What temperature range do Adande drawers cover?

Each drawer is independently adjustable between +15°C and −22°C in 1°C increments—so you can run chiller and freezer in the same stack.

How does Adande keep food from drying out or frosting?

The patented low‑velocity “Hold‑the‑Cold” system maintains stable humidity and prevents frost build‑up—ideal for seafood, pastry and delicate prep.

Is installation complicated?

Many models are 240V/10A plug‑in with removable bins for easy cleaning. Confirm ventilation space and engine side for your bench layout.

Why choose Adande over standard underbench fridges?

Energy efficiency, temperature precision, and food integrity. Many sites report material savings in running costs and reduced food waste over time.

Browse all Adande or call 1300 001 336 for a tailored spec and install plan.