CookRite ATFS-75 5-Tube Commercial Gas Deep Fryer – NG / LPG
Updated:
At KW Commercial Kitchen, the CookRite ATFS-75 is a 5-tube gas deep fryer engineered for high-output commercial kitchens. With a total heat capacity of 140 MJ/h and 34.7L oil tank, it delivers fast recovery, extended oil life, and consistent frying results—ideal for cafés, restaurants, clubs, and catering facilities. Choose between Natural Gas (NG) or LPG to suit your kitchen setup.
Built for Australian high-volume kitchens
The ATFS-75 combines five powerful tube burners, precision thermostatic control (0°C–240°C), and 304 stainless construction with flame failure safety and an oil-cooling zone for efficiency and safety in demanding conditions.
Key features & specifications
- Fuel Type: Natural Gas (NG) or LPG (selectable at order)
- Burners: 5 × 28 MJ/h (total 140 MJ/h)
- Oil Capacity: 34.7 L
- Temperature Range: 0°C – 240°C (thermostatic control)
- Safety: Flame failure and automatic safety shut-off
- Construction: 304 stainless steel body with oil cooling zone
- Controls: Manual ignition and front control panel
- Drainage: Front-mounted screw-on pipe for safe oil disposal
- Dimensions (W×D×H): 535 × 765 × 1128 mm
- Weight: 76.5 kg (packed 90.5 kg)
- Warranty: 2 years parts & labour + 2 years parts (with registration)
Compliance & safety (AU)
- Gas: Must be installed by a licensed gas fitter per AS/NZS 5601.1; ensure ventilation and clearances.
- Electrical: Not applicable for main operation.
- Food safety: Suitable for FSANZ-compliant kitchens with hygienic oil management.
Convenience & usage advice
- Daily cleaning: Filter oil and wipe tank edges; clean baskets and external surfaces with warm neutral detergent.
- Maintenance: Inspect burners and thermostat regularly; replace oil as per usage cycle; annual service by licensed fitter recommended.
Ideal applications
- Restaurants & cafés
- Clubs, pubs & bars
- Food courts & takeaway outlets
- Hospitals & aged care kitchens

At a glance
- 34.7L oil tank with cooling zone
- 140 MJ/h total gas output
- 304 stainless steel build
- 4-year parts coverage (with registration)
Frequently Asked Questions
1) How do I clean it daily without harming finishes?
Turn off gas, allow to cool, filter oil, wipe surfaces with mild detergent, and rinse with warm water; avoid steel wool or chlorine cleaners.
2) What routine maintenance keeps performance stable?
Filter oil daily, inspect burners and thermostat, clean oil tank weekly, and book annual service for calibration and safety checks.
3) What are the gas requirements and typical energy use?
Requires NG or LPG with ¾″ BSP inlet; 140 MJ/h total input; usage cost depends on hours of operation and load.
4) What about installation and Australian compliance?
Install by a licensed gas fitter per AS/NZS 5601.1; ensure compliance with ventilation and clearance standards.
5) Are spare parts and accessories available?
Yes – baskets, thermostats, and burner components available. Quote model and serial for accurate matching.
Specs source: CookRite ATFS-75 supplier data and technical documentation.
Running Cost (estimate)
Ready to order or need expert advice?
Call 1300 001 366 or Contact our team.
Browse Gas Fryers. Fast AU shipping.














