Fagor C-G941H Gas 4 Burner + GN 2/1 Gas Oven – 42.8kW | KW Commercial Kitchen

• Gas: Must be installed/commissioned by a licensed gas fitter per AS/NZS 5601.1; size pipework/regulators for 42.8kW.
• Electrical (ignition where fitted): RCM compliant; use a dedicated circuit if specified.

• Pan control: Put rapid-boil tasks on the 10.2kW zone; hold sauces on 8kW burners.
• Oven best practice: Preheat the cast-iron floor before roasting; load trays sideways for stability.

• Busy à-la-carte lines needing simultaneous pan work + roasting
• Hotel/catering kitchens using GN 2/1 trays
• Sites prioritising robust components and easy front servicing

At a glance

• 800-mm wide footprint; total 42.8kW gas load
• GN 2/1 static oven, 3-level rails, cast-iron floor
• 2mm AISI 304 top; enamelled cast-iron trivets; IPX5
• 2+2 year warranty (registration required for extra parts)

Use a pH-neutral degreaser and microfibre cloth; avoid abrasives/chlorine; dry trivets after service.

Weekly: clear burner ports and check flame picture; Monthly: inspect pilots/thermocouples; Quarterly: a technician safety check.

Install to AS/NZS 5601.1 with correct clearances and ventilation; RCM applies to any electrical ignition components.

Common parts include burners, trivets, knobs and oven door seals; quote model/serial for exact parts.

Specs source: Fagor Professional datasheet for C-G941H (incl. 42.8kW, 800×930×850mm, GN 2/1 oven, R3/4" inlet).